Laboperator

laboperator-server

v5.16.2

v2.19.0

v2.20.0

v2.21.0

v2.22.0

Regular release cycle; First fully validated release

v3.0.0

v3.0.1

v3.1.0

v3.1.1

v3.2.0

v3.3.0

v3.3.1-hotfix

v3.4.0

v3.4.1

v3.5.0

v3.5.1

v3.6.0

v3.6.1

v3.7.0

v3.7.1

v3.8.0

v3.8.1-hotfix

v3.9.0

v3.10.0

v3.10.1

v3.11.0

v3.11.1-hotfix

v3.12.0

v3.13.0

v3.13.1

v3.14.0

v3.15.0

v3.16.0

v3.17.0

v3.18.0

v3.19.0

v4.0.0

v4.1.0

v4.2.0

v4.3.0

v4.4.0

v4.5.0

v4.6.0

v4.7.0

v4.7.1

v4.7.2

v4.8.0

v4.8.1

v4.9.0

v4.10.0

v4.11.0

v4.12.0

v4.13.0

v4.14.0

v4.14.1-hotfix

v4.14.2-hotfix

v4.15.0

v4.15.1

v4.15.2

v4.16.0

v4.17.0

v4.18.0

v4.18.1-hotfix

v4.18.2

v4.19.0

v4.20.0

v4.21.0

v4.22.0

v4.22.1-hotfix

v4.23.0

v4.24.0

v4.24.1-hotfix

v4.24.2

v4.24.3

v4.25.0

v5.0.0

v5.1.0

v5.2.0

v5.2.1

v5.2.2

v5.2.3

v5.2.4

h4. Driver Releases

New:

- STX44 from LiCONiC: new device (driver-liconic-stx v1.0.0)

Updated:

- SI600 from Sentron: stability improvement and Ready indicator (driver-sentron-si v1.1.0)
- System Health Monitor from labforward GmbH: commands for reading and setting Mender configuration (driver-system-health v1.2.0)
- EL Press from Bronkhorst: use two significant figures for all values (driver-bronkhorst-el-press v1.1.0)

v5.2.5

v5.3.0

h4. Driver Releases

New:
- AtmoWEB from Memmert: new device (driver-memmert-atmoweb v1.0.0)
- Fluent from Tecan: new device (driver-sila-client v2.0.0)
- GK420d from Zebra: new device (driver-zpl-printer v2.0.0)

Updated:
- STX44 from LiCONiC: new channel “operation_status” (driver-liconic-stx v1.1.0)
- IP Camera from Axis Communications: new command “set_preset_position” (driver-axis-camera v1.1.0)
- All SiLA devices supported by the driver-sila-client: (driver-sila-client v2.0.0): support for SiLA properties and commands that use custom data types, SiLA commands with array parameters, and SiLA observable commands and properties.
- All serial- and tcp-based balances from Mettler Toledo: query the device’s calibration status regularly and let the balance calibrate itself when needed (driver-sicsserial v3.0.0 and driver-sicstcp v2.0.0)

Breaking change:
- All SiLA devices supported by the driver-sila-client: shorter command and channel names for all SiLA properties and commands (driver-sila-client v2.0.0)
- Generic ZPL Printer from labforward GmbH, CL Printer from Citizen, CK420d from Zebra: renamed command “send_ZPL_command” to “send_zpl_command” (driver-zpl-printer v2.0.0)

Fixed:
- All serial- and tcp-based balances from Mettler Toledo: reliable capturing of weight measurements triggered from the device (driver-sicsserial v3.0.0 and driver-sicstcp v2.0.0)

Removed:
- All serial- and tcp-based balances from Mettler Toledo: removed the channel “display_weight” which interfered with the device’s calibration and the driver’s reliability for capturing measurements (driver-sicsserial v3.0.0 and driver-sicstcp v2.0.0)

v5.4.0

v5.5.0

h4. Driver Releases

New:
- OM815 from Vogel: new device (driver-vogel-osmometer v1.0.0)

Updated:
- Cubis MSA, Cubis MSE, Cubis MCE, Cubis II MCA and BP Series from Sartorius: improved driver stability (driver-sartorius-sbi v4.7.0)

v5.6.0

h4. Driver Releases

Updated:
- IP Camera from Axis Communications: driver parameter for controlling the picture quality (driver-axis-camera v2.0.0)
- IP Camera from Axis Communications: limit the frame rate to 5 and lower the default camera resolution to 800x450 and frame rate to 1 (driver-axis-camera v2.0.0)

Fixed:
- All serial- and network-based balances from Mettler Toledo: fix for weight measurements without decimal digits and fix for devices that do not report the calibration status (driver-sicsserial v3.0.1 and driver-sicstcp v2.0.1)

v5.7.0

h4. Driver Releases

*driver-mt-sevencompact v1.4.0*
(SevenMulti S47 - Mettler Toledo, SevenCompact S220 - Mettler Toledo, SevenEasy S20 - Mettler Toledo)
- Added:
	- new SevenMulti S47 from Mettler Toledo.
- Updated:
	- layout update to replace line chart with table.

*driver-opc-ua-client v1.0.0*
(OPC-UA Client - labforward GmbH)
- Added:
	- new OPC-UA Client from labforward GmbH.

*driver-opc-ua-lads v2.0.0*
(MIXcontrol 20 (LADS) - 2mag, Generic (LADS) - labforward GmbH)
- Updated:
	- separate functional units in different dashboard tabs.

*driver-sicsserial v3.0.2*
(XP - Mettler Toledo, XPE - Mettler Toledo)
- Fixed:
	- frozen device displays.

*driver-zpl-printer v2.1.0*
(Generic ZPL Printer - labforward GmbH, CL Printer - Citizen, GK420d - Zebra)
- Updated:
	- layout update to improve usability.
- Fixed:
	- layout update to fix broken “Send ZPL Command” button.

v5.7.1

h4. Driver Releases

*driver-sila-client v2.1.0*
(every device)
- Added:
  - Dynamic Tab Support
- Updated:
  - Increased Stability

*driver-device-simulator v1.1.0*
(Device Simulator - labforward GmbH)
- Added:
  - Dynamic Tab Support
- Updated:
  - Increased Stability

v5.7.2

h4. Driver Releases

*driver-system-health v1.4.0*
(System Health Monitor - labforward GmbH)
- Added:
  - Channel System Load

*driver-liconic-stx v1.1.1*
(STX44 - LiCONiC)
- Fixed:
  - Wrong labels for the Channel “shaker_status”

*driver-anton-paar-dma v3.0.0*
(DMA Series - Anton Paar)
- Updated:
  - User-friendly Dashboard
- Fixed:
  - Special characters in method names are now parsed correctly
- Removed:
  - Start Measurement Command

v5.7.3

h4. Driver Releases

*driver-mt-easydirect-ph v1.0.0*
(SevenDirect - Mettler Toledo)
- Added:
  - New device

*driver-mt-sevencompact v1.5.0*
(SevenExcellence (Printer) - Mettler Toledo)
- Added:
  - Compatibility with SevenExcellence via Printer interface

*driver-sicstcp v2.1.0*
(XPR (TCP) - Mettler Toledo, XSR (TCP) - Mettler Toledo)
- Updated:
  - Table Dashboard element scope increased to 24 hours

*driver-sicsserial v3.1.0*
(AX26 - Mettler Toledo, MS-S/MS-L - Mettler Toledo, AB-S/PB-S - Mettler Toledo, MS-TS - Mettler Toledo, BBx46 - Mettler Toledo, XS - Mettler Toledo, XPE - Mettler Toledo, XPR - Mettler Toledo, AX205 - Mettler Toledo, XSE - Mettler Toledo, XP - Mettler Toledo, XSR (RS232) - Mettler Toledo, MX - Mettler Toledo)
- Updated:
  - Table Dashboard element scope increased to 24 hours

*driver-sartorius-sbi v4.8.0*
(Cubis MSA - Sartorius, Cubis MSE - Sartorius, Cubis MCE - Sartorius, Cubis II MSA - Sartorius, BP Series - Sartorius)
- Updated:
  - Table Dashboard element scope increased to 24 hours

*driver-axis-camera v3.0.0*
(IP Camera - Axis Communications)
- Updated:
  - Improve frame rate and quality of video stream
- Fixed:
  - Fix issue with connecting to camera configured to accept only secure connection via https

v5.8.0

h4. Driver Releases

*driver-buchi-openinterface v3.0.0*
(R-300 - Büchi, R-220 pro - Büchi, SyncorePlus - Büchi)
- Updated:
	- Dashboard layouts to use tabs.
- Fixed:
	- Wrong device status when the device is off.

*driver-sila-client v2.2.0*
(SiLA Client - labforward GmbH, Kevin - Fraunhofer IPA, Labeler - HTI, Spark - Tecan, Buddy - bAhead, Cedex Bio HT Analyzer (SiLA Client) - Roche, Fluent - Tecan)
- Added:
	- Support for array properties.
- Fixed:
	- Proper decoding of error messages from SiLA devices.

v5.9.0

h4. Driver Releases

*driver-ika-rctdigital v5.2.2*
(RCT digital - IKA, RCT digital (Dual-Operation) - IKA)
- Added:
	- Note in the dashboard describing the probe’s behavior.

*driver-liconic-stx v1.2.0*
(STX44 - LiCONiC)
- Added:
	- Line charts in the dashboard.
- Fixed:
	- Wrong device status when the device is off.

v5.9.1

Driver Releases

*driver-axis-camera v3.1.0*
(IP Camera - Axis Communications)
- Updated:
	- Finer pan and tilt control by taking the zoom level into account.

*driver-modbus-client v1.0.0*
(Modbus Client (TCP) - labforward GmbH)
- Added:
	- New device.

v5.9.2

h4. Driver Releases

*driver-modbus-client v1.1.0*
(Modbus Client (TCP) - labforward GmbH)
- Updated:
	- Device properly reconnects to the Modbus device when the connection is lost.

*driver-sicsserial v4.0.0*
(AX26 - Mettler Toledo, MS-S/MS-L - Mettler Toledo, AB-S/PB-S - Mettler Toledo, MS-TS - Mettler Toledo, BBx46 - Mettler Toledo, XS - Mettler Toledo, XPE - Mettler Toledo, XPR - Mettler Toledo, AX205 - Mettler Toledo, XSE - Mettler Toledo, XP - Mettler Toledo, XSR (RS232) - Mettler Toledo, MX - Mettler Toledo)
- Removed:
	- All active communication for XP and XPE balances in order to ensure the stable operation of the balances.

v5.10.0

v5.10.1

Driver Releases

*driver-axis-camera v3.1.1*
(IP Camera - Axis Communications)
- Fixed:
	- Improve stability of device status detection, and subsequently the resulting camera stream.

v5.10.2-hotfix

v5.10.3-hotfix

h4. Driver Releases

115 drivers have been updated to the latest dependencies, to fix a memory leak issue and improve stability.

*driver-axis-camera v3.2.0*
(IP Camera - Axis Communications)
- Updated:
	- Improved stability of device status and subsequently camera stream

*driver-anton-paar-dma v3.1.1*
(DMA Series - Anton Paar)
- Fixed:
	- Bug that prevented new instances of the device to be added

*driver-biotage-initiator v2.0.0*
(Initiator+ - Biotage)
- Updated:
	- Renamed Command parameter to fit naming conventions

*driver-biotage-isolera v2.0.0*
(Isolera One - Biotage)
- Updated:
	- Renamed Command parameter to fit naming conventions

*driver-biotage-selekt v3.0.0*
(Selekt - Biotage)
- Fixed:
	- Typo in Channel name

*driver-buechi-b545 v2.0.0*
(B-545 - Büchi)
- Updated:
	- Renamed Commands to fit naming conventions

*driver-esco-mixer v2.0.0*
(Mixer 50 - Esco-Labor)
- Updated:
	- Renamed driver setting “clientId” into “deviceId”
	- Loop logic (offline state is now OFF, not ERROR)
- Fixed:
	- Incorrect serial driver settings names

*driver-hirschmann-opus v3.0.0*
(Opus - Hirschmann)
- Updated:
	- Renamed Channels and Commands to fit naming conventions

*driver-ika-rctdigital v5.3.0*
(RCT Digital - IKA, RCT Digital (Dual-Operation), IKA)
- Fixed:
	- Viscosity Channel range no longer limited between 0 and 100%

*driver-iuta-sensor-array v2.0.0*
(Sensor Array - IUTA)
- Updated:
	- Renamed Channels to fit naming conventions

*driver-liconic-stx v1.4.0*
(STX44 - LiCONiC)
- Updated:
	- Data points are only created when Channels have a new value

*driver-kds-legato v2.0.0*
(Legato 100 - KD Scientific)
- Updated:
	- Renamed Commands to fit naming conventions

*driver-modbus-console v2.0.0*
(Modbus Console (Serial), Modbus Console (TCP) - labforward GmbH)
- Updated:
	- Renamed driver setting “clientId” into “deviceId”
- Fixed:
	- Incorrect serial driver settings names

*driver-serialconsole v3.0.0*
(Serial Console - labforward GmbH)
- Updated:
	- Renamed Commands to fit naming conventions

*driver-sh-autodosage v3.0.0*
(Autodosage - S+H)
- Updated:
	- Renamed Commands to fit naming conventions

*driver-smartlab-uart-shield v2.0.0*
(UART Shield - SmartLabs Solutions)
- Updated:
	- Renamed Command parameter to fit naming conventions

*driver-system-health v1.6.0*
(System Health Monitor - labforward GmbH)
- Added:
	- Command to download Connector Box logs

*driver-tecan-cavro-xlp v2.0.0*
(Cavro XLP - Tecan)
- Fixed:
	- Duplicate Commands in definition

*driver-techman-robotarm v2.0.0*
(Robot Arm - Techman)
- Updated:
	- Renamed Command parameter to fit naming conventions

*driver-vacuubrand-vacuuselect-modbus v2.0.0*
(VACUU-SELECT (TCP) - Vacuubrand)
- Updated:
	- Renamed driver setting “clientId” into “deviceId”

v5.11.0

h4. Driver Releases

*driver-buechi-b545 v2.0.1*
(B-545 - Büchi)
- Fixed:
	- Bug that would crash driver in Connector Box v.4.3 and above

*driver-ika-eurostar v2.2.1*
(EUROSTAR 60 Control, EUROSTAR 100 Control - IKA)
- Fixed:
	- Bug that would crash driver in Connector Box v.4.3 and above

*driver-kern-abj v1.2.1*
(ABJ-NM - Kern)
- Fixed:
	- Bug that would crash driver in Connector Box v.4.3 and above

*driver-kern-plj v1.2.1*
(PLJ-C - Kern)
- Fixed:
	- Bug that would crash driver in Connector Box v.4.3 and above

*driver-mt-easydirect-ph v1.2.0*
(SevenDirect - Mettler Toledo)
- Changed:
	- Default scope for dashboard data display set to 24 hours
- Additional instructions on dashboard

*driver-mt-sevencompact v1.7.0*
(SevenCompact - Mettler Toledo)
- Changed:
	- Default scope for dashboard data display set to 24 hours

*driver-presens-eom v2.2.1*
(EOM PH LG1 MIni - PreSens)
- Fixed:
	- Bug that would crash driver in Connector Box v.4.3 and above

*driver-radwag v1.2.1*
(R Series - Radwag)
- Fixed:
	- Bug that would crash driver in Connector Box v.4.3 and above

*driver-sartoriusbalance v1.2.1*
(CP/GC/GP, Extend Series, Entris Series - Sartorius)
- Fixed:
	- Bug that would crash driver in Connector Box v.4.3 and above

*driver-sentron-si v1.3.0*
(SI600 - Sentron)
- Changed:
	- Default scope for dashboard data display set to 24 hours

*driver-sevenstar-mfc v1.2.1*
(D08 series- SEVENSTAR)
- Fixed:
	- Bug that would crash driver in Connector Box v.4.3 and above

*driver-sh-autodosage v3.0.1*
(Autodosage - S+H)
- Fixed:
	- Bug that would crash driver in Connector Box v.4.3 and above

*driver-waldner-ac3 v1.2.1*
(AC3 - WALDNER)
- Fixed:
	- Bug that would crash driver in Connector Box v.4.3 and above

*driver-yudian-ai v1.2.1*
(AI Series - Yudian)
- Fixed:
	- Bug that would crash driver in Connector Box v.4.3 and above

*driver-yudian-ai-719 v1.2.1*
(AI-719- Yudian)
- Fixed:
	- Bug that would crash driver in Connector Box v.4.3 and above

h4. Various bugfixes

This release focus on fixing many bugs that has been reported by our users. Including:

- User configured preferred timezone will be respected in all display of date and time
- Fix display of dynamic thresholds in line chart when custom scope are chosen
- Fix display of the value `0` in DeviceChannel element in dashboard
- Allow driver to upload file larger than 4MB, with a maximum of roughly 15MB
- Fix tracking of device usage when command are being sent directly from the device's dashboard

v5.11.1

Functional Specification